GPSR - Patterned acrylic & MDF sheets

Manufacturer Details

• Business Name: DreamCutCrafts / Amarantos Ltd

• Mailing Address: Lyulin 10, bl. 148

• Email:

 

• Support Hours: 9:00 - 18:00 UTC+2, Monday – Friday

 

1. General Product Information

Product Type: UV Printed Cast Acrylic Sheet and/or UV Printed MDF Sheet

Intended Use: Suitable for laser cutting, engraving, and crafting purposes with machines such as Glowforge, OMTech, Vevor, Muse, xTool, Thunder Laser, and others.

Material Options: Premium cast acrylic (1/8” / 3 mm thickness) or MDF (medium-density fiberboard, 1/8” / 3 mm thickness).

Created By: DreamCutCrafts

Target Audience: Hobbyists, crafters, and small business users with experience using laser cutters or engraving machines.

2. Safety Information

• Risk Assessment: The acrylic and MDF sheets themselves pose no direct safety risks under normal handling conditions. However, caution must be exercised when cutting, engraving, or finishing the materials, especially due to potential sharp edges or fumes during laser processing.

• Warnings:

• Always use proper ventilation when laser cutting or engraving acrylic or MDF.

• Use laser-compatible settings to avoid fire hazards.

• Handle cut edges carefully, as they may be sharp.

• Keep finished pieces and small cut parts out of reach of children under 6 years old.

• Adult supervision is recommended when crafting with these materials.

3. Instructions for Use

1.         Prepare Your Design:

• Create or upload a compatible file (SVG, DXF, etc.) to your laser software.

• Adjust sizing to match your project and machine requirements.

2.         Prepare the Material:

• Choose either UV printed acrylic or MDF sheets, depending on your design needs.

• Verify material thickness (1/8” / 3 mm) compatibility with your machine settings.

3.         Cut or Engrave:

• Follow your laser cutter’s safety and operation guidelines.

• Always conduct a test cut when using new settings.

4.         Finish and Assemble:

• Clean cut edges carefully if necessary.

• Assemble your pieces following your project design.

⚠️ WARNING: Small parts may pose a choking hazard. Not suitable for children under 6 years old without supervision.

4. Materials and Equipment

• Recommended Equipment: Laser cutter (Glowforge, OMTech, Muse, Thunder, xTool, etc.).

• Compatible Materials: UV printed cast acrylic sheets, UV printed MDF sheets.

• Material Thickness: 1/8” (3 mm). Other thicknesses may be available; check product descriptions for specifics.

 5. Compliance and Testing

• Product Integrity: Sheets are tested for quality, UV print durability, and laser compatibility.

• Legal Rights: Designs printed onto materials are original or properly licensed.

• Liability Disclaimer: The customer assumes responsibility for the safety and compliance of their final crafted product.

 6. Product Maintenance and Updates

• Storage Recommendation: Store sheets flat in a dry, cool place away from direct sunlight to maintain UV print quality.

• Version Control: If significant changes are made to product offerings or materials, customers will be informed via product updates.

Reporting Safety Concerns:

If you encounter any safety concerns related to this product, please contact us immediately at our email.